Home
Videos uploaded by user “Wood Whisperer Offcuts”
Assembly of a PM2000 Table Saw
 
07:59
I have been running a PM2000 in my shop for nearly 10 years and the move to Colorado afforded me the opportunity to sell the old one and replace it with a newer version that features a 50" fence and the heavier duty workbench extension. For those wondering what happened to the old saw, it's actually a cool story. We needed the cash to help with the move so we offered the saw up for sale. This was around the time we were running our Woodworkers Fighting Cancer charity auctions and our buddy Joseph Muench generously stepped up and bought the saw. But he didn't actually want it for himself. Instead, he donated it to the charity auctions. The winner of the auction was Guild member Socheat Sou and the proceeds went to the 2016 WFC charity drive. So a big thank you to Joseph for his generosity and to Socheat for giving my saw a great new home. So let's talk about the new saw. The PM2000 comes in several configurations and variations including 3HP, 5HP, 30" fence, 50" fence, a router table extension, and a workbench extension. The model I have is the 3HP 50" Workbench model. http://amzn.to/2j1fAJZ This video is more or less an instruction manual for the assembly of the PM2000 table saw. As many times as I've assembled tools, I always find it easier to follow a video over a traditional manual so I thought this might be of use to new PM2000 owners. Even if you don't have a PM2000, you might be interested in seeing the assembly process. For more info, check out the full post on our website: http://www.thewoodwhisperer.com/videos/assembly-pm2000-table-saw/ Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 59493 Wood Whisperer Offcuts
Shop Heating Options
 
09:32
For the full article, go here: http://www.thewoodwhisperer.com/videos/shop-heating-options/ Shop heating is a new thing for me. I had to do some research and make a few compromises before finally settling on my shop heating solution. Here's a rundown of the things I considered as well as my justifications for what I have. Special thanks to my fellow woodworkers on Facebook for supplying me with images of their shop heating solutions. Here are the two units I installed: Fahrenheat FUH54 - http://amzn.to/2iO2NhE Fahrenheat FUH724 - http://amzn.to/2imiYjf Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 128742 Wood Whisperer Offcuts
Assembly of an Oneida Dust Gorilla Pro
 
09:41
Check out the original post on our website for a detailed description: http://www.thewoodwhisperer.com/videos/assembly-oneida-dust-gorilla-pro-cyclone-dust-collector/ Before we get into this assembly video, let's address the elephant in the room: what happened to the ClearVue? Just like my table saw, I took the move to Colorado as an opportunity to try something new. One less tool to move and work around as I get the new shop together and one more chance to gain perspective on a different brand. In addition, Oneida offers stands for their cyclones and that's a feature I wanted in the new shop. So after a few pleasant phone calls with the folks at Oneida, we are now working with them directly on the dust collection solution for the new TWW shop. And just to clear the air, I have nothing negative to say about Clear Vue. Their cyclone served me well for over a decade and I am lucky to have gotten to know the kind folks that run the company. But now I also feel lucky to know some of the great people behind Oneida! My sales guy Mark had a bunch of questions for me about my shop and after doing some smart people math, he determined that the 5HP Dust Gorilla Pro (http://www.oneida-air.com/inventoryD.asp?item_no=XGK050105H) was the right model for me. We added a 55-gallon drum and an extension to the filter stack that would further improve air flow. I realize it's just dust collection but I'd be lying if I said I wasn't super excited to receive this delivery. The pallet was packed well and I was especially impressed with the way they packaged the motor. In the past, I had to install the impeller myself. That usually involved some careful work to make sure the screws are torqued properly and I usually just hoped for the best. Oneida saved me the work and gave me peace of mind by doing this for me at the factory. By the way, the picture above was sent to me ahead of time as standard practice prior to shipping. Large shipments can be something of a mystery so it was awesome getting to see the pallet ahead of time so that I could prepare my space. The installation was simple but somewhat labor-intensive. These are heavy-duty steel components so you have to expect them to be heavy. If you can get a helper, please do so. While a fairly strong person can do most of the work alone, there's one part that absolutely requires assistance: the final motor installation. I don't know how much the 5HP motor weighs exactly but even with two people, it's going to be a little tricky to walk it up a ladder and drop it onto the blower housing. Take your time, exercise caution, and be sure to eat your Wheaties that day. Because I was alone and didn't have someone to help me lift the motor, I employed some good old fashioned "Jersey ingenuity." To be perfectly clear: I DO NOT RECOMMEND DOING WHAT I DID. Neither Oneida nor I endorse this method and we insist that you follow the instructions in the manual. In spite of the obvious hypocrisy and covering of my posterior, the video will show you how I used an appropriately weight-rated rope, pulley, hook and chain to hoist the motor above the cyclone and set it down into position with my truck. Because the system isn't powered up and I don't have the ductwork installed, I can't give you any feedback on its performance yet. But what I can tell you is that this cyclone is built like a tank and lives up to Oneida's reputation for world-class quality. Everything about it is big, beefy, and well thought-out. The cyclone body is made from thick gauge steel. The blower housing is made from thick plastic as a single smooth mold. The HEPA filter is massive with tons of surface area. And the motor looks like it was taken off of a jet plane. To say the least, my expectations are high and at this point I would be inclined to keep small children and pets away from the inlet. As with many of the products featured on The Wood Whisperer, the cyclone was provided by Oneida in exchange for exposure in a video. As always, my opinions are my own. To learn more about the Dust Gorilla Pro models and features, go here: http://www.oneida-air.com/inventoryD.asp?item_no=XGK050105H Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 49010 Wood Whisperer Offcuts
YouTube VS Books
 
04:31
Here are a few of my favorite woodworking books: Hybrid Woodworking (Of course I have to list my own book) http://www.twwstore.com/product/hybrid-woodworking Understanding Wood http://amzn.to/2pYzz3f Understanding Wood Finishing http://amzn.to/2pIhWUq The Minimalist Woodworker http://amzn.to/2qFnKLs Greene & Greene - Design Elements For The Workshop http://amzn.to/2pI87Wr Workbenches http://amzn.to/2pIjePg By Hand & Eye http://amzn.to/2pYTYoT The Unplugged Workshop http://amzn.to/2qFmOqt The Impractical Cabinetmaker http://amzn.to/2pI3QlQ A Marquetry Odyssey http://amzn.to/2pI3UC6 Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 27410 Wood Whisperer Offcuts
Lift Lock N' Roll Lathe Mobility System
 
02:34
When I buy an extremely niche product, I don't typically make a video about it. But this one did such a good job of solving a problem for me and someone recently requested that I talk about it, so I figured I would make a quick video. My new Colorado shop is smaller than I'm used to, and that means more of my tools need to be mobile. One of the heaviest and most difficult to move tools is my Powermatic 3520B Lathe. I've hurt my back several times pushing that thing around. I did a few quick web searches and quickly found a solution: the Lift Lock N' Roll Lathe Mobility System. Unfortunately, it seems they only make this add-on for a few Powermatic models and the Jet 1642. The system is easy to install and doesn't require you to life the lathe at all. As long as the feet are extended, the system slides right under the legs and bolts in place. While the sales video of the product gave me the impression that I could easily engage the wheels with my feet, the reality is it's quite difficult. I eventually got it to work on the lighter tail stock side of the lathe. Under the head stock, forget about it. Fortunately, it's pretty easy to engage the system by hand. So you might be wondering how in the world is it actually EASIER to do with your hands? Well, the problem lies with the position of the handle. It's so close to the legs of the lathe that you have to wedge your foot in a tight space where the handle is happier resting against the side of your foot rather than the sole of your shoe. So even though it doesn't take much pressure to move the handle, you have almost no leverage in this position. Perhaps if I were wearing something other than running shoes, the result would be different. But if you kneel down and pull the handle out with your hand, it's a pretty simple matter to then push the handle down to engage the wheels. Bottom line is it makes my lathe mobile, and that's what I bought it for. Please note that I have no connection with the makers or vendors of this product. Here's a link to the product: https://www.woodturnerscatalog.com/p/110/4697/Lift-Lock-and-Roll-Lathe-Mobility-System Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 15131 Wood Whisperer Offcuts
Shop Tour & Sub Panel
 
05:38
Before we get too far with the renovation details, I’d like to take a minute or two to show you the garage space itself. I’m working with about 950 square feet which is pretty respectable! There are two single car garage doors flanking a double door in the middle. I have three large windows that are all fairly high on the wall. The floor has a significant slope and because the property itself is sloped, the rear wall has a concrete bump-out that could make utilizing the wall space just a bit trickier than usual. But before we can do anything else, we need to talk about POWER! One of the first things I did in the space was have the sub-panel installed. Without electricity, I obviously can’t connect any of my tools. So I went with a surface-mounted panel of the highest capacity the electrician recommended: 125A. That should be enough capacity for tools, heaters, computers, lights, and anything else I could possibly need considering I’m a one-man shop. And speaking of heat, it’s starting to get cold and you’ll probably see in the background that the mini-split is already installed. More on that next time. Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 50712 Wood Whisperer Offcuts
Tool Wall, Garage Door Cover, New Fans, DC Upgrades - Shop Update 6/17
 
10:27
Almost before I realized what was happening, I found myself fully engaged in phase 2 of my garage to shop conversion. 2x4s were purchased, nails were driven, and organization was born! Here's a rundown of some of the products mentioned in the video. Unfortunately, it looks like some of these are unavailable or discontinued. Hampton Bay Fans - http://www.homedepot.com/p/Hampton-Bay-Industrial-60-in-White-Energy-Star-Ceiling-Fan-52860/204507386 Multi-Fan Speed Control Switch - The one I used: http://amzn.to/2sjdYTL Here's something comparable: http://amzn.to/2r5K71g Watco Danish Oil (Medium Walnut) - http://amzn.to/2sXG2Jg Rockler HD Clamp Racks - https://www.rockler.com/rockler-hd-clamp-rack?sid=AFN86 Oneida Dust Sentry - https://www.oneida-air.com/inventoryD.asp?item_no=AXB999110B Oneida Drum Insert: https://www.oneida-air.com/inventoryD.asp?Item_No=ABX000035&CatId={E73B4361-F6D4-44D5-A815-E35ECB580382} Goodyear Retractable Hose - http://amzn.to/2sH6HdI Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 28782 Wood Whisperer Offcuts
Rocketbook for Shop Notes
 
05:45
*****UPDATE***** After many months of having the Rocketbook in my shop I feel I should provide an update. While I still think the technology is cool and useful, I found myself quickly going back to my comfort zone of pencil and paper. For some reason, my brain is so used to using pencil that I found it difficult to be creative with the ink pen. My natural instinct is to grab a pencil and the nearest paper pad and go. I think this really depends on your personality in both creativity and organization. Another factor is that my shop sketches and notes, in reality, are not all that useful in the long run. So there's not as much necessity to have access to them digitally as I originally thought. If you have trouble keeping track of your shop notes, sketches and lists, Rocketbook notebooks are something you should definitely consider. Thanks to a recommendation by a viewer on Facebook, I am now able to easily organize and scan my shop notes and access them on any cloud service of my choice. I think you're going to like this.  As stated in the video, Rocketbook is not a sponsor. But if you use the links below to buy any of these products at Amazon, I'll receive the standard Amazon affiliate fee which is always appreciated.  Rocketbook Everlast - http://amzn.to/2vmSFy3 Rocketbook Wave - http://amzn.to/2w1z7Bz Pilot Friction Pens -  http://amzn.to/2w1zdZX Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 16053 Wood Whisperer Offcuts
Moving Out of the Dream Shop
 
10:19
I'm moving to Colorado. That means I need to dismantle my entire shop and get it ready for storage and transport. That includes packing up the smaller tools, taking down the dust collection ductwork, offloading some lumber, and sitting around watching a few guys move my stuff. Why am I moving? http://www.thewoodwhisperer.com/articles/why-are-you-moving/ Dream Shop Construction Video: http://www.thewoodwhisperer.com/videos/dream-shop-build/ Installing Nordfab Ductwork: https://youtu.be/yd5TqFZs3bQ Rubber Tiles For A Shop Floor? http://thewoodwhisperer.com/articles/rubber-tiles-for-shop-flooring/ Check out our main Woodworking channel for project and technique videos: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com
Views: 153843 Wood Whisperer Offcuts
Moving Into The Colorado Shop
 
06:03
We are finally getting settled in Colorado so I thought it would be nice to do a little shop update. Read the full article here: http://www.thewoodwhisperer.com/videos/moving-colorado-shop/ Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com
Views: 65879 Wood Whisperer Offcuts
Woodworking in America 2016 Interviews
 
10:01
At Woodworking in America 2016 I caught up with a few folks you might recognize and threw them some softball questions. I hope you enjoy! Here are the websites of the folks featured in this video: Shannon Rogers: http://renaissancewoodworker.com Matt Cremona: http://mattcremona.com Nick Ferry: http://nickferry.com Jay Bates: http://jayscustomcreations.com April Wilkerson: http://wilkerdos.com Aaron Marshall: http://garageshop.blogspot.com Dyami Plotke: http://penultimatewoodshop.com Tyler G: http://diytyler.com Mike Fulton: http://mfwoodshop.com Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com
Views: 12040 Wood Whisperer Offcuts
Shop Update: End of Phase 1
 
13:48
We appreciate your support on Patreon! http://patreon.com/woodwhisperer I'm officially done with Phase 1 of the garage to shop conversion and I'm ready to start building. I wanted to bring you up to speed by showing the various changes I've made up to this point for those who've been following along with my progress. None of these things warranted a standalone video so I figured I'd lump them all into one recap. I'll publish an official shop tour soon that will likely contain some redundant information with regard to this video. Check out the full writeup here: http://www.thewoodwhisperer.com/videos/shop-update-end-phase-1/ Helpful Links Parallel Clamp Rack: http://www.thewoodwhisperer.com/articles/parallel-clamp-rack/ Utilitarian Clamp Rack: http://www.thewoodwhisperer.com/articles/utilitarian-clamp-rack/ Rockler Clamp Rack: http://www.rockler.com/pipe-clamp-rack-bar-clamp-rack?sid=AFN86 Nordfab Ductwork Installation: http://www.thewoodwhisperer.com/videos/installing-nordfab-ductwork/ Rubber Floor Tiles: http://www.thewoodwhisperer.com/articles/rubber-tiles-for-shop-flooring/ Thanks for following along on this new adventure. It's been fun but it's now time to make some sawdust! Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 46110 Wood Whisperer Offcuts
Let's Do Some Flocking! - Friday Live!
 
50:14
1:14 - Happy Anniversary Marc & Nicole 4:16 - Welcome to the loving, anniversary edition of Friday Live! 6:58 - Nicole made a baby blanket! Pattern is from Jenny from Missouri Star Quilts https://www.missouriquiltco.com/ 8:30 - Peter bought Marc a special shirt 9:23 - Kevin sent Marc and Nicole special coffee 10:44 - Questions on air filtration using the PM Fan 13:39 - How often should you change your planer blades? 15:44 - Recommendations on a Festool vac and addons? https://www.amazon.com/ideas/amzn1.account.AFHHUQGITEST5CAPSETLVZXCGJDQ/MUCBTHY2XFPZ 18:37 - Tearing when cutting veneer, what am I doing wrong? 21:17 - What would I need to upgrade in my shop to build cabinets and a bed? 25:30 - How does Marc feel about people using his designs for profit? https://www.thewoodwhisperer.com/selling-wood-whisperer-designs-for-profit/ 29:09 - Do you need to let the wood rest after jointing\planing? 31:34 - Is the Miter Station still on sale? https://thewoodwhispererguild.com/product/miter-station/ 35:54 - Is Cremona's work part of the holiday sale? https://www.thewoodwhisperer.com/calendar/ 37:48 - Flocking durability - Are some brands better than others? 41:22 - Lines are appearing in a board when jointing - What's causing them? 42:18 - Check out the Guild mentorship on Facebook if you are a guild member! https://thewoodwhispererguild.com/mentorship/ 46:12 - Thanks to our new Patreon supporters! https://www.patreon.com/woodwhisperer Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer
Views: 10064 Wood Whisperer Offcuts
Make Marc Mad and Get a Free Project! - Friday Live!
 
01:02:36
0:27 - Welcome to Friday Live! 0:36 - Marc has(received) a little package and some stickers 2:@7 - We have a sale! https://thewoodwhispererguild.com/product/gaming-table/ https://thewoodwhispererguild.com/product/dining-chair/ 3:24 - There is a Denver Area meetup @ My Own Two hands https://mo2hands.com/ 4:37 - Support the show on Patreon! 4:58 - Are you making any holiday gifts? If so, what? 8:30 - Mar posted a video about the IVAC system. 9:17 - How can I clear up\even out darker pockets on Cherry? 10:47 - Have you considered breaking the Highboy into smaller skill packages? 11:52 - Would you use Blum drawer slides again? 13:53 - Joe says that by watching every offcuts episode, he has had every question answered. 16:16 - Any suggestions on dust control with tall ceilings without ducting? 17:37 - How do you store tools in the shop and protect them from your kids? 20:12 - What is "Offcuts?!" https://www.youtube.com/woodwhispereroffcuts 21:18 - What do you do if something goes horribly wrong in a project? https://www.youtube.com/watch?v=k-TWPlUI2jM 24:19 - If you bought the Ruobo on sale do you still get into the Guild group? https:\\www.facebook.com\groups\twwguild https://thewoodwhispererguild.com/product/split-top-roubo-workbench/ 24:40 - Why are the bases on the miter station cabinets different than the shop cabinets? https://thewoodwhispererguild.com/product/miter-station/ https://www.thewoodwhisperer.com/videos/shop-cabinets/ 27:53 - Any opinions\suggestions on various forstner bits? 29:53 - Any ideas for a smaller live edge project using curly maple? 32:70 - Can you put a finish over Watco Danish Oil once it has cured? 34:10 - Are there any alternatives to Festool's knockdown joinery methods? 35:42 - Why was Marc wearing flannel in the Powermatic video? https://www.youtube.com/watch?v=B-wlk5yhIUY 38:33 - What tool would you definitely want for building garage shelves? 39:59 - Would you recommend restoring an old Rockwell Unisaw or buy a new saw? 41:18 - Would Marc ever consider doing technique videos for the guild (such as fixing mistakes?) 42:41 - Any way to fix a cat pee soaked cabinet? 49:08 - Any suggestions on bench dogs for a thinner bench? https://www.youtube.com/watch?v=yV_lz2SH5nM 50:55 - Can you speak to the different types of bandsaw blade teeth available? 52:38 - What's the worst thing you have ever made that you gave to someone else? 59:48 - Two giveaways this month! https://www.thewoodwhisperer.com/giveaway/ Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer
We're Back! Friday Live!
 
41:13
1:59 - Welcome to Friday Live! Family Style! 3:05 - Marc went to IWF in Atlanta with Titebond! 4:55 - Gifts that were sent in! 6:18 - Marc wears a size Large shirt. 7:12 - Gifted topographical map from Elevated Woodworking https://elevatedwoodworking.com/ 8:55 - https://www.patreon.com/woodwhisperer - Support the show! 10:20 - Cutting a bevel in a long board - Does it make sense to use a feather board after the blade? 11:43 - Which is better PVC or HVAC ductwork for DC collection? 14:31 - How do you stop boards from curving when you are doing a panel glueup? 16:40 - Do you start your sander on the wood or off? 18:00 - Do you have (And use) a handheld power planer? 21:25 - Since you started wearing glasses, have you had any issues lining up saw blades with your lines? 22:35 - Is there a proper way to tension a bandsaw blade? Should you detension when not in use? 25:16 - How do you organize all of your clamps? 28:14 - Have you talked about your miter station fence decision? 31:16 - Nicole is going to make a memory box for her dad for Woodworkers Fighting Cancer this year http://woodworkersfightingcancer.com 32:26 - WoodWhisperer Guild mentoring program 33:16 - How does Marc like his new Incra router table? How does it compare to the Jessem? 33:50 - How will you introduce woodworking to your kids? 37:40 - Building a new shop - What would you make sure you run before the shop is finished? 39:22 - Are you going to the Rocky Mountain Tool Collectors meeting? 39:54 - Is this a parenting show? 40:17 - Thanks to our Patreon members! Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer
Views: 10159 Wood Whisperer Offcuts
The Avalan'che - Friday Live PM!
 
45:26
2:26 - New Patreon supporters! 3:40 - Marc's adventures at Marc Adams School 6:40 - Nicole's new hobby - Quilting! - https://listalu.com/ 9:22 - Should I invest in a high quality square/straight edge (Woodpeckers/Starrett) over something from the big box store? 15:27- Are there any pointers you have for the Leigh R9 jig when cutting dovetails or box joints? 18:56 - What changes would you make for the chest of drawers looking back? 19:58 - Can you talk about the Guild mentorship program? 22:36 - Do you know if liquid hide glue work as well as hot hide glue? 25:12 - Is there another in-person class Marc is planning on in the future? 27:37 - Any tips or pitfalls to avoid when building my first workbench? - https://www.amazon.com/dp/1440343128/?ref=idea_lv_dp_vv_d 31:15 - Should I build the Roubo or a Scandinavian bench? 32:02 - I never know exactly what speed to run my router bits, are there any tips to know what speed is right? 35:08 - Have we heard anything about the new book? 41:52 - What about a quilt rack for a future project? 43:30 - Guild Project winner - Stewart Johnson 43:58 - Denver area maker meetup - Sunday June 22nd
Friday Live on a Thursday?!
 
29:42
Join us for lots of blah blah blah and coffee!
Quiltpeckers - Friday Live 11/30/18
 
59:36
1:36 - SimpleCove Contest - https://www.simplecove.com/contest/2018-year-review-contest/ 3:00 - Nicole is getting glasses! 3:32 - New Patreon supporters - https://www.patreon.com/woodwhisperer 4:30 - New Woodpeckers tools - Polygauge SS - https://www.woodpeck.com/onetime-tool-polygauge-ss.html 6:39 - The only reason everyone showed up today - The Giveaway 8:08 - Why Marc's got the OneTimeTools 8:55 - Polygauge Demo/Q&A 11:40 - Marc is popular with the Instagram ladies 12:15 - Full disclosure on the Woodpeckers goods 14:54 - How do you utilize your drum sander in your workflow? 17:15 - Do you have any ideas what next year's projects will be? 17:38 - Any experience with the NOVA DVR Drill press vs a Powermatic? 19:44 - Do you have opinions on variable speed drill presses? 20:40 - Can you talk about end vs long grain cutting boards? 23:05 - Sculpted rocker on sale this week - https://thewoodwhispererguild.com/product/sculpted-rocker/ 24:20 - Are there visual clues on appropriate amounts of glue and clamp pressure? 27:08 - Ben can't apply glue appropriately 27:40 - What is the laser level you used to layout your alcove cabinets? 30:05 - How can I fit doors to a cabinet that is not square itself? 32:17 - Marc is a terrible trim carpenter 33:45 - What happened to the Guild scholarship? 34:55 - Have you met James King? 36:00 - How do you go about putting stars in a wooden flag? 37:43 - Would ipe be good for a glued up mallet head? 38:35 - Would glue be sufficient for a bookcase shelf in a dado, or would you use screws as well? 40:32 - Will you have a book bundle with both books when the new one releases? 41:40 - Is a jointer planer combo worth it if I'm doing mostly hand tool work? 43:50 - How do you get past the anxiety of cutting into expensive stock? 47:05 - What was a tool you felt like you had to have, but when you got it, you realized you didn't really need it? 49:27 - Is there an advantage to breaking a large tenon up on a breadboard end vs one large one? 50:13 - When will we see a plan for the tapering jig? 51:11 - How high a grit do you use on your drum sander? 51:38 - Any recommendation for wheels to use for mobile tools? 52:32 - Is there etiquette for buying used tools? 54:13 - Have you played Starcraft? 55:45 - Do you have a guild project you recommend for someone who has a limited shop? https://thewoodwhispererguild.com/product/shaker-table/ 57:08 - Is it possible to get guild projects converted to another format other than sketchup? 57:47 - DelVe square winner! - Mark Nylan 58:40 - Guild project winner! - Greg Brown
Canadian Love  - Friday Live!
 
57:05
2:45 - Playing Fallout 76 yet? 3:59 - Check out Nicole's podcast - Ladies of L33t http://ladiesofleet.com 4:40 - If you had three weeks off, what would you build and why? 6:00 - What router lift would you recommend? 14:10 - Guild sale every weekend until Christmas. http://thewoodwhisperer.com/calendar 14:50 - Will dye absorb deeper into the wood than stain? 18:40 - Canadian Amazon Wood Whisperer store is finally live! - https://www.amazon.ca/shop/thewoodwhisperer 20:20 - What size of blade and tooth count did you use for the bandsaw box video? 21:51 - Are you going to play WoW classic? 22:39 - Did you ever do anything with the space under your storage rack? 24:40 - Do you have any advice or videos on how to get comfortable with power tools? 29:40 - How would you edgeband a curved desktop? 30:33 - You need an aeropress! 31:28 - Bandsaw or table saw if you could only have one? 32:30 - Are you a guild member if you buy merch in the store? http://thewoodwhispererguild.com/faq 33:30 - Have you tested Rubio monocoat yet? 36:25 - When is the next guild meeting? 37:57 - What should I do if I'm overbooked? 39:10 - Do you have guild meeting notifications? 41:07 - How do you decide between plywood and solid wood for a project? 42:55 - Do you have a video on edgebanding? 43:59 - What vise would you install in your workbench if you could only have one? 45:12 - Do you hear from David Marks anymore? 45:39 - What do you use that hatchet for? 46:22 - Would the Rubio product be a good turning alternative or better for flatwork? 47:10 - Is there a project you're hesitant to start? 47:58 - Any concerns using a biscuit joiner to cut a groove? 48:27 - Any thoughts on basic layout or electrics on turning a garage into a shop? 49:50 - Thanks Brian & other Patreon supporters 50:24 - Can you give a tutorial on different types of vises? 52:32 - What do I use to protect a shoe rack from water? 54:23 - Do you stream Woodtalk anymore? 55:04 - How's the book coming along? 55:43 - Are there going to be any more of Jory's projects in the guild? Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer http://www.amazon.ca/shop/thewoodwhisperer
Kinlin' - Friday Live!
 
43:43
2:34 - Is there a rule of thumb of how wedges are inserted on wedged tenons? 6:01 - What's your favorite inexpensive tool that makes life easier in the shop? 7:38 - What's the best way to get rid of tan lines in wood? 8:35 - How do you feel about other Youtube woodworkers opening online schools? 10:40 - What is the best finish for a desk made of oak? 14:00 - What is the best router bit for mortising? 15:50 - What do I need to know about the domino to skip the painful learning process with the tool? 18:52 - Are bandsaw blades disposable or are they sharpenable? 21:00 - Shannon praise - https://www.handtoolschool.net/ 23:03 - Is a plunge router worth the extra cost vs a fixed one? 24:08 - Any suggestions on a good scribing tool? 25:02 - Have you ever worked with Pecan? 25:27 - Do you have any experience with jobsite tablesaws? Any tips on maximizing results? 29:00 - Do you have any discounts on benchcrafted hardware? 29:45 - Is a combinational sander worth getting? 30:30 - Any recommendations on securing a floating desk to the wall? 33:12 - Should I attach aprons of a raised dog feeder with mortise and tenons or would a butt joint be ok? 34:10 - What's your secret to get your wife to love woodworking? 37:08 - Eight videos release in the guild today! 39:00 - Guild project winners - Kevin & Keith! 39:58 - Executive desk tour 43:03 - Maybe no show next week
Views: 10366 Wood Whisperer Offcuts
Holiday Gift Guide - Friday Live Style!
 
01:03:49
You can find just about everything we discussed in our Amazon Store! https://www.amazon.com/shop/thewoodwhisperer?listId=3P6GYQP46ELJO 0:55 - Welcome to Friday Live 4:07 - Today is a Special Holiday Gift Guide 5:40 - Mechanical Pencil Set https://www.amazon.com/dp/B01DMDI5XU/?ref=exp_thewoodwhisperer_lv_dp_vv_d 7:39 - 3M 6500 Respirator (With Pink Filters!) https://www.amazon.com/dp/B00IF7RCU6/?ref=exp_thewoodwhisperer_lv_dp_vv_d https://www.amazon.com/dp/B0009XYN7O/?ref=exp_thewoodwhisperer_lv_dp_vv_d 11:24 - Woodpeckers 641 Square https://www.amazon.com/dp/B01466V5FW/?ref=exp_thewoodwhisperer_lv_dp_vv_d 11:24 - Woodpeckers 1281 Square https://www.amazon.com/dp/B079S1R5YS/?ref=exp_thewoodwhisperer_lv_dp_vv_d 12:57 - Wood Whisperer Branded Scraper (Non-Branded version https://www.amazon.com/dp/B079BGZRY9/?ref=exp_thewoodwhisperer_lv_dp_vv_d) 15:13 - Megapro 15 in 1 driver https://www.amazon.com/dp/B004VJY0ZM/?ref=exp_thewoodwhisperer_lv_dp_vv_d 16:53 - JayBirds Earbuds https://www.amazon.com/dp/B01MECNLU5/?ref=exp_thewoodwhisperer_lv_dp_vv_d or https://www.amazon.com/dp/B07GVCZPSJ/?ref=exp_thewoodwhisperer_lv_dp_vv_d 20:37 - SoundPeats Earbuds https://www.amazon.com/dp/B074THH5Q2/?ref=exp_thewoodwhisperer_lv_dp_vv_d 21:15 - Blue Spruce Chisels https://bluesprucetoolworks.com/collections/chisels/products/bench-chisel 24:21 - Hybrid Woodworking (Marc's First Book!) https://www.twwstore.com/product/hybrid-woodworking OR https://www.amazon.com/dp/B00HV0VNJY/?ref=exp_thewoodwhisperer_lv_dp_vv_d 25:06 - Essential Joinery (Marc's NEW Book!) https://www.amazon.com/dp/1940611873/?ref=exp_thewoodwhisperer_lv_dp_vv_d 27:51 - Home Automation\Electronics 28:10 Amazon Cloud Cam https://www.amazon.com/dp/B01C4UY0JK/?ref=exp_thewoodwhisperer_lv_dp_vv_d 29:27 - Nest Protect Smoke\CO2 Detector https://www.amazon.com/dp/B00XV1RD0K/?ref=exp_thewoodwhisperer_lv_dp_vv_d 31:30 - Sonos One Smart Speaker https://www.amazon.com/dp/B074XLMYY5/?ref=exp_thewoodwhisperer_lv_dp_vv_d 38:18 - What chairs are those? Blacker House Chair that Marc built at the William Ing School Sculpted Rocker https://thewoodwhispererguild.com/projects/sculpted-rocker/ 39:27 - Marc uses rapid taps when chiseling, where did he learn this technique? 42:25 - Congratulations Scott Hampshire on your new baby! 44:58 - Now that you have had both the Bosch and Kapex Miter Saw, which do you think is better (at half the price) 46:34 - Is there any piece of advice that you have done a complete 180 on or that you have evolved most on? 50:00 - Do you have a recommendation for a hardwood source in Denver? Austin Hardwoods - https://www.austinhardwoods.com/ 51:44 - Have you ever thought about making a speaker\speaker box or have you in the past? 54:26 - Do you use a pore filler before Osmo or is the Osmo enough? 55:24 - Why didn't you paint the walls before doing the trim for the home theater room? 57:51 - Did Marc make the trim around the door? 60:13 - Go to Marc's Instagram to see his Home Theater project https://www.instagram.com/woodwhisperer/?hl=en 61:58 - Wood Whisperer Loot Bag! https://thewoodwhispererguild.com/product/superfan-loot-bag/ Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer https://www.amazon.ca/shop/thewoodwhisperer
Friday Live!
 
33:22
1:45 - Mail time! 3:40 - New Patreon Supporters 4:00 - Denver maker meetup recap - http://denvertoollibrary.org/ 5:39 - Atlanta Meetup @ Highland Woodworking - https://www.highlandwoodworking.com/ 7:12 - Are there any books you'd recommend that cover broad design strategies to deal with wood movement? 10:47 - How does one use shop shavings and waste to flavor BBQ? 12:59 - Marc won a major award 13:50 - How long should the screws be on the roubo bench dogs? 15:25 - Is the Festool Brushless orbital sander worth the cost? 17:02 - How should I stack wood so that it doesn't warp? 18:45 - Does older growth move less than new growth? 20:14 - What happened to Wood Talk? 20:50 - What finish remover should you use for teak? 23:10 - For an outdoor bench would you recommend drawboring or fox tenons? 24:55 - Do you think zebrawood is a good choice for the humidor project? - https://thewoodwhispererguild.com/product/the-humidor/ 27:19 - How do I get a water ring off an end grain table? 29:15 - How do you envision your audience? 31:21 - What kind of finish would you use for a mirror frame in a bathroom?
Let's Rub it Out! - Friday Live!
 
45:58
0:20 - Welcome to Friday Live - Now with new camera setups! 1:55 - Nicole is in a great mood today! 3:45 - Thanks to our new Patreon supporters! Support us on Patreon: https://www.patreon.com/woodwhisperer 4:38 - What is the best finish for a bassinet? 7:00 - Best finish for hot drink cups turned on a lathe? 8:09 - Do you keep your templates or toss them? 10:47 - Would spray shellac work on a salt cellar? https://www.thewoodwhisperer.com/videos/salt-cellar/ 13:01 - Did a cement floor versus epoxy make a difference with the torsion assembly table? https://www.thewoodwhisperer.com/videos/my-new-assembly-table/ 14:13 - Do I need to be concerned with ratios on large dovetails - Reclaimed barnwood table for a wedding. 16:01 - How do you figure out angles in your projects? 17:45 - Any tips or tricks to rub out a finish that has not been pore filled? 20:01 - Miter saw switch to the DeWalt, does it use a laser and how do you like it? 21:13 - How long do I need to let a shellac finish sit before rubbing it out to a high gloss finish? 22:52 - Would you recommend getting an aftermarket laster? 24:32 - Is it worth turning a long handle for a socket bench chisel? 25:17 - Peter bribes Marc with Cocobolo. 26:08 - Is there a table saw option for cutting 4" or thicker table tops? 27:23 - What's the thinnest glue up that you have done? 27:59 - What's a good way to have a project reviewed to say what could be improved? 30:00 - Does Marc offer classes? 33:08 - Hvae you found a solution to sheet good storage that you are happy with? 34:24 - Any idea when the Coffee Gaming Table plans are coming out? 34:56 - Are "plan" frame and panel aka Shaker doors ok or do they need to be raised panel? 35:56 - What is the smallest\thinnest edge glue up that you have done? 37:15 - What can I use besides a drum sander to make veneer? 38:37 - What's the biggest project that you have built? 39:36 - What's more important? A bigger jointer or a bigger planer? 40:11 - What's a good bandsaw blade? 40:57 - Last minute project made of Walnut, can I spray Lacquer and be safe? 41:48 - Free guild project winner! http://thewoodwhispererguild.com 42:10 - We will be doing guild sales again this year! 43:33 - What would you rather have as a gift? Coffee or Beer? Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer
Holy Smokes There Are Questions - Friday Live!
 
59:12
0:05 - Denver meetup swag 1:15 - New Patreon Supporters - https://www.patreon.com/woodwhisperer 2:37 - Listener made Cigar holders - https://www.etsy.com/listing/639026948/travelingportable-cedar-cigar-box?ref=shop_home_feat_1 4:08 - Kings Fine Woodworking Swag - https://kingsfinewoodworking.com/ 5:10 - Farmhouse table on sale this week - https://thewoodwhispererguild.com/product/farmhouse-table-benches/ 5:40 - Are you doing the gift guide this year? 6:55 - Do you find either a drum, disk, or edge sander to be the most used? 8:55 - Boremax bit feedback 9:42 - What are your thoughts on the big box store laminated tops? 11:15 - Do you think a 91" tall frame and panel door is too big? Should I float the panels? How many hinges should I use? 15:05 - Where does Marc get his T-shirts? - https://www.amazon.com/shop/thewoodwhisperer 16:00 - Do both sides of a plane blade need to be polished to the same grit? 18:35 - A few words about the dangers of sponsors. 18:57 - Why did you not have as large and emphasis on dust collection in earlier videos? 24:55 - Favorite kitchen cabinet case joinery? 26:28 - How are the bluetooth headphones by Jaybird in terms of longevity? 30:05 - Any chance for green woodworking projects in the guild? 32:00 - Any tips to keep glue lines as invisible as possible? 34:20 - Where is the best place to buy NordFab ducting? 37:07 - What value concerns you on your particulate monitor in the shop? 38:28 - How should I put a centerline on my router base? 39:23 - Do you have anything in mind for a group project for people of all ages and skill levels that could be auctioned off? 43:43 - Do you have any issues with your lumber storage in shop and acclimation? 45:15 - Since moving to Colorado, is maple still your choice for a workbench? 46:35 - How do I make a respiration work with a beard and big face? 49:25 - Update on the new book? 51:34 - Will you cover angling mortise and tenons in the book? 52:12 - How often should I drain my compressor with weekly use? 53:20 - Do you have a favorite method for laying out dovetails without a dovetail marker? 54:45 - What is the dumbest thing Marc has ever done?
The One With Cremona - Friday Live
 
01:23:44
0:34 - Special Guests 2:21 - Beers of choice for tonight 3:56 - Denver area maker meetup 6:01 - Presents from Jen 8:37 - Dust collection alert adapter 10:35 - What did you use to remove the coating on your new chisels? 12:18 - Can you tell me about a brand of panel saw or what TPI to get? 13:29 - What brand of sandpaper do you use/does brand matter? 16:18 - Do you have any tips for replacing jointer knives? 18:06 - On your Blacker house chair, did you use a pattern for the inlay or do it free form? 20:48 - Where do you see your business 5 years from now? 25:39 - Can Matt describe what hair products he uses to grow 4" of hair in one night? 26:49 - What advantages do floor standing planers have over benchtop models? 28:44 - What species is referred to as ironwood? 29:09 - Are dominos strong enough for a trestle table? 29:30 - With dado zero clearance inserts, do you just make it as wide as possible, or buy multiple inserts? 34:21 - Do you trust your taps in knotty pine and plywood? What size of tap do you recommend for 4/4 stock? 36:41 - What skill or technique are you working toward improving the most? 40:38 - What's the deal with square drive screws? 42:00 - What's your favorite woodworking feature? 48:05 - Where can I get some good online instruction for a handplane? 49:10 - Is there something you continue to do but know there is a better method? 51:29 - Advice for a hand tool cabinet? 52:52 - Should I sell my kapex since I generally use my carvex? 55:00 - How do you know the correct grit to sand up to? 57:15 - When will we see Nicole using the lathe? 59:05 - What's the best way to reduce a fuzzy surface coming off a benchtop planer? 1:00:41 - Does endgrain always take stain darker than the edgegrain? 1:03:30 - Can I use 1/4" wood as a back panel to a cabinet? 1:05:27 - Why aren't you doing a roubo tool cabinet with Matt? 1:09:02 - Would sycamore or red oak be good for a roubo? 1:10:00 - Is a hot dog a sandwich or not? 1:10:33 - Is the market for artisan chisels and hand tools already saturated? 1:14:38 - Can you offer advice to use a tablesaw to edge joint material? 1:15:47 - Do you know any youtubers who sell mallets? 1:17:55 - When are some instances you'd choose water based finishes over oil based? 1:20:44 - New Patreon supporters 1:21:13 - Guild project winner Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 37204 Wood Whisperer Offcuts
LED Shop Lighting
 
07:00
When I selected the lighting for the Dream Shop, T8 fluorescent lights were the obvious choice. LED technology existed but was still cost prohibitive. Even two years after the build I considered retrofitting the space with LED bulbs and once again I couldn't justify the cost. But in 2017 (five years after the initial Dream Shop build), it's a whole different story! I'm now in a new space in Colorado and I have the opportunity to install completely new fixtures and these days it seems like LED is really the way to go. We're working exclusively with American Green Lights who designed and supplied our lighting solution: http://www.americangreenlights.com/ For additional information and the full article on LED Shop Lighting, head to our website: http://www.thewoodwhisperer.com/videos/led-shop-lighting/ Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 135634 Wood Whisperer Offcuts
Acoustic Panel Installation
 
10:52
The Case for Acoustic Treatment Since I record videos in my shop, the quality of the audio is very important to me. Most garages and shops features lots of hard surfaces and that means voices and tool noise tends to bounce around the space creating lots of echo and reverberations. To combat that, I'm installing ATS Acoustic Panels (2' x 4') on the ceiling. These panels are actually pretty easy to make as they consist of a acoustic panel core, a solid frame, a plywood back, all with a layer of acoustically-transparent fabric on top. But it's been a few months since I built a piece of furniture and time is money, so I decided to buy my panels instead of building them myself. ATS Accoustic Panels: http://amzn.to/2l1Th7E EZ Ancors: http://amzn.to/2kmPB14 For more details, head to our website: http://www.thewoodwhisperer.com/videos/acoustic-panel-installation/ Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 57582 Wood Whisperer Offcuts
Marc's Dragon Breath - Friday Live PM!
 
01:10:44
5:08 - Thanks for the new Patreon supporters - https://www.patreon.com/woodwhisperer 6:28 - What should I use to cut water based poly in a spray application? 8:20 - Is it a bad idea to put my dust collector in a garage closet? 10:00 - How do I remedy dovetails that I've cut too deep? 12:59 - What finishes will properly bind to each other? 15:05 - Is there any reason to use anything other than Titebond III? 16:55 - Can I amend a guild project order to a previous order? 19:08 - Are you going to have another guild apprentice? 21:56 - How will you keep your dogs from running away? 22:17 - How do you get motivated to get out in the shop when I'm juggling a full time job and kids? 26:22 - Can you use two different finishes on the pizza peel side by side? 27:56 - What would you recommend for joinery other than the Festool Domino? 29:46 - How tight should the cap iron on a block plane be? 31:52 - What type of finish would you recommend for spalted maple? 33:51 - What's the name of your WoW Guild? 35:35 - How do you mask the smell of certain woods? 36:45 - Would you use a mortiser or a router? 38:29 - Is there any way to mix danish oil with a water based finish? 41:39 - What the difference between different kinds of sandpaper grits - https://www.youtube.com/watch?v=XtkIuWcW3cE 43:26 - Is it better to trim tenons or mortises to get the fit correct? 44:39 - How do you deal with tool depression 55:45 - Help me convince my wife that a cat in the shop is a bad idea. 58:22 - Any tips on rust removal and prevention? 1:00:04 - Are there any benefits to adding color or pigment to laquer or film finishes? 1:02:00 - It's Marc's time for some 'special' pills 1:04:20 - Miter station preview
Friday Live!
 
36:08
Join us for lots of blah blah blah and coffee!
Kiss and Tell - Friday Live!
 
55:49
0:55 - Welcome to Friday Live! 1:25 - Thanks to our new Patreon supporters! Support us on Patreon: https://www.patreon.com/woodwhisperer 2:19 - If you want to send us stuff, this is the right address! 5856 S. Lowell Blvd Unit #32 #107 Littleton, CO 80123 3:02 - Cool sign for The Wood Whisperer Guild! Created by https://www.instagram.com/makerexperiment/ 4:29 - Mateo has someone who has a crush on him at school! 7:06 - What are your thoughts on GF Salad Bowl Finish Vs. Butcher Block Oil for a cheese board? 9:04 - If you had to replace one powertool with a handtool forever, what would it be? 10:21 - On the Miter Saw Station, what was the thought process on the pullouts\trays and drawers? https://thewoodwhispererguild.com/product/miter-station/ 12:58 - Question on wedged tenon shoulders 14:28 - Rasps Vs. Files Vs. Floats - When should I use each one? 15:53 - Have you ever considered putting a router into a "station" as opposed to a standalone table? 17:15 - What type of Dust Collection is needed in a shop? 23:49 - How would you create a round coffee table? 25:16 - How do you balance other hobbies with Woodworking? 28:23 - Is there a light (weight) wood that you'd recommend for hinged bookshelves? 30:42 - If you needed to work with an open garage door, when would you stop using power tools? 33:17 - Marc recently mentioned moving away from product reviews, what does this mean for the guild? https://thewoodwhispererguild.com 36:44 - How do you attach false drawer fronts? 37:49 - What is your favorite router table? 41:00 - Do you need to worry about wood movement when drawboring? 42:50 - Do you have a commonly used tool that is an ergonomic nightmare (such as a card scraper)? 44:00 - How do you make a table with a super glossy white finish? https://www.thewoodwhisperer.com/videos/woodworkers-fighting-cancer-2015/ 46:08 - Does anyone have a good recommendation for a tenoning jig? 46:25 - Is it better to have a dedicated assembly table and workbench or just workbench? 52:08 - How would you price a cutting board? Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer
Coffee Poo - Friday Live 11/23/18
 
42:54
0:01 - Welcome to Friday (Offcuts) Live! 00:09 - Black Friday Sales Bell Forest - 25% off! https://www.bellforestproducts.com/exotic-lumber-projects/ Powermatic 10% Off Machines and Accessories Jet 15% off Machines and Accessories JET Clamps 25% off at Acme Tools http://shareasale.com/r.cfm?b=776904&u=237197&m=54029&urllink=&afftrack= Rockler http://www.rockler.com/?sid=AFN86 & Woodcraft http://www.woodcraft.com/?A=133 both have sales TWW Store has a sale! 30% off! https://www.twwstore.com/ Current guild project that is on sale - Blanket Chest! https://thewoodwhispererguild.com/product/gg-blanket-chest/ 4:07 - What's the worst purchase Marc has ever made? 4:30 - Thanks to our new Patreon supporters! Support us on Patreon: https://www.patreon.com/woodwhisperer 5:18 - If something happened to your Domnino would you quickly replace it? 6:23 - What happened to the Ninja Turtle that used to be on the wall? 6:54 - What's the best\safest way to remove old yacht varnish? 9:05 - Did Marc used to use more Festool tools? Why? https://www.thewoodwhisperer.com/what-happened-with-festool/ 13:19 - What is your opinion on the various brands of T-Track? 15:20 - Any concerns with scaling the width down of the Trestle Table? https://www.thewoodwhisperer.com/videos/trestle-table-pt-1/ or https://www.thewoodwhisperer.com/videos/legs-mt-dimpling-knock-trestle-table-pt-1/ 17:14 - Using the woodshop widget - What do you do with the data? 20:05 - Is Nicole's Chicken Pot Pie recipe available? https://www.allrecipes.com/recipe/26317/chicken-pot-pie-ix/ 21:18 - What hand tool helps you fit tenons? Can I use a router plane? 23:39 - Can you put a date on the wall behind you? 25:45 - Are you using the Incra 5000 still or did you build a new sled? https://thewoodwhispererguild.com/events/guild-meetings/ 26:32 - What is the benefit to using a brass mallet for chisels instead of a deadblow hammer or block of oak? 30:03 - Are miter saw and table saw blades interchangeable if they are the same size? 31:06 - What guild project would you recommend for a newborn baby? 33:!6 - What should I use to get the sticky stuff off my new jointer? 33:50 - Jay-Birds - How do you put them on the charger? 34:34 - Nicole should do the voice-overs on at least one video. 37:10 - Is this just to make money on superchats? Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer http://www.amazon.ca/shop/thewoodwhisperer
The I Don't Know Show - Friday Live!
 
53:55
0:00 Welcome to Friday Live! 0:23 - Watchability changes made for your pleasure! 1:45 - Thanks to our new Patreon supporters! https://www.patreon.com/woodwhisperer 3:04 - Cheap Rigid planer - Upgrade incrementally or replace entirely? 6:03 - Congrats to Scott for making Eagle Scout! 7:37 - Can a radial arm saw (RAS) be a replacement for a table saw (TS)? 9:51 - Do you still use your Japanese chisels (due to their metric sizing) or have you switched to using your Blue Spruce chisels? 11:35 - What benefits TWW more, watching on Amazon or Youtube? https://www.amazon.com/The-Wood-Whisperer/dp/B074VFLJ56 http://youtube.com/thewoodwhisperer 13:45 - Countersink\Stop Collar bit - Amana or Veritas? 14:38 - What can I do to make a worksite saw more precise? 16:51 - Do you ever find that your projects are based more on function than aesthetic? 18:!5 - Congrats to Chris on his second child AND to making Marc feel better about his life! 19:31 - Thoughts on using finished Cedar? 21:41 - Now that Marc is devoted to full time content creation, how does he find time for personal improvement\learning? 25:56 - PSA - Heat exhaustion is REAL (dangerous) - STAY HYDRATED! 26:26 - 5 HP Saw using VFD is bogging down, any ideas? 27:43 - Any suggestions on putting the numbers on a cribbage board? 29:17 - If you could make a project without ANY constraints or requirements, what would that be? 31:02 - Bubbles in epoxy on wood, how do you remove the epoxy? 32:52 - What is Marc's oldest\dorkiest video? 34:45 - Good luck at Marc Adams - is it too late to join? Call Marc Adams! https://marcadams.com/workshops/make-gamingcoffee-table/ 35:45 - Is there any rule on the hardness\softness of the Tenon Vs. the Mortise? 38:08 - Is there a difference (in usability) between square or round dog holes? 39:42 - is the extent of a roundover just personal preference? 41:42 - Hearing protection - What are the options? 44:34 - Will Marc be at IWF? http://www.iwfatlanta.com/ 46:16 - Boards are not a standard size, how do you get a proper size dado? 48:00 - Is Marc still liking his J-Birds? https://www.amazon.com/gp/product/B01M7NCT5O/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=thewoodwhispe-20&linkId=c5cdc3a6d952d1666cc3166e2be83fb8 50:00 - What is the learning curve for making dowel pins? https://www.lie-nielsen.com/product/dowel-plate-standard http://www.leevalley.com/us/garden/page.aspx?p=75519&cat=1,41131 53:20 - No Friday live next week! Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer
Views: 11976 Wood Whisperer Offcuts
Friday Live! - Shop Progress Update
 
41:18
This week, I show off the new shop since we're almost done with phase 1 of the conversion. Time to make some sawdust finally! The topic rundown is below and don't forget you can help support the show on Patreon! http://patreon.com/woodwhisperer 0:40 - Kansas City Show Recap 1:25 - Denver Maker Meetup Recap. Facebook group: https://www.facebook.com/groups/DenverAreaMakers/ 4:15 - Thanks to Joseph Muench? 6:35 - Andy Klein’s Miter Fold Blade: http://www.rockler.com/rockler-miter-fold-dado-set?sid=AFN86 7:15 - January Giveaway Wrapping up – Enter Now! http://www.thewoodwhisperer.com/giveaway/ 8:35 - Marc has dermatitis 10:22 - Marc in Woodcraft Magazine 10:43 - Shop Update Tour 19:55 - Arcade Cabinet Video Released: http://www.thewoodwhisperer.com/videos/bartop-arcade-raspberry-pi/ 20:25 - How do you plan on keeping dust out of your living space? 21:34 - Does plywood need a backer veneer? 23:25 - Can you use too much cold press veneer glue? 24:12 - What recommendations can you make on shop lighting? 26:48 - Do you know when the next Powermatic 15% off sale will be? 28:20 - What’s the longest board you can run through your table saw? 28:54 - Does the jointer fence rest below the table saw surface? 30:30 - Will you be filming the removal of the door rails? 32:03 - What are your thoughts on pen turning? 33:21 - Recommendations for sign appropriate wood? 34:37 - My jointer seems to be milling a bow into board, what’s wrong? 36:02 - Do you know what the student discount at Austin Hardwoods is? 36:20 - Will you mount the dust collector on the wall in the future? 36:46 - How long do you run these videos? 36:58 - Can I use my Festool router and track to drill dog holes in my benchtop? 37:53 - Patreon Thanks! 39:35 - Marc is pre-diabetic. Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 33837 Wood Whisperer Offcuts
Prescription Safety Glasses - Friday Live!
 
59:55
1:07 - Marc's glue caddys for IWF 3:02 - Why doesn't IWF ever come to the west coast? 4:25 - Mail time! 6:37 - New glue roller - https://amzn.to/2NbuDk3 8:51 - Prescription safety glasses - https://www.framesdirect.com/framesfp/Titmus-tdrgqi/r.html 13:05 - What do you use for countersink bits for plugs? Do you cut your own plugs? - https://amzn.to/2KyIQpl https://www.amazon.com/dp/B00BJFK6N6/?ref=idea_lv_dp_vv_d - http://www.leevalley.com/en/wood/page.aspx?p=32320&cat=1,180,42288 18:38 - Any advice on how to convince my wife to let me spend lots of money on woodworking tools? 20:20 - What's the best finish to keep my maple white and not yellow? 21:45 - How do you remember the direction and orientation for your handplane irons? 25:25 - Any idea on where to buy router templates? 26:56 - If you could go back in time and rename your business, what would you change it to? 28:25 - Do you think the Festool plunge router is worth it? 32:13 - How do you handle dust collection for handheld tools? Is a dust extractor that much better than a shop vac? - https://amzn.to/2lJs9MU 36:52 - What plunge router bits do you consider must haves? 38:20 - Why do you need a router bit to flatten the benchtop if they've already been planed before? 42:03 - What about a beginning set of bits for a router? - https://amzn.to/2lGOgDV 45:00 - Can I put a wedge under my track saw to cut a bevel that isn't sufficient for a tablesaw? 46:55 - Any ideas on how to control humidity without an AC? 48:40 - How do you and Nicole combat Youtube burnout? 54:20 - How do you like your Blue Spruce vs Japanese chisels? 56:11 - Is it official that you miss the shop help from AZ most of all? 57:20 - Do you still play WoW? 59:06 - Guild project winner - Chuck Thompson! Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer
No Wood Dust - Friday Live!
 
46:18
1:44 - Marc will (sadly) not be attending WoodDust in Australia https://www.wooddustaustralia.com/ 3:35 - FWW Live is coming up! Marc will be there! http://www.finewoodworkinglive.com/ 4:15 - Nicole now has PINK Eyemuffs! https://www.eyemuffs.com/ 5:00 - Marc received a cool Mortise & Tenon shirt! 6:03 - Thanks Wade for the very awesome turning tool that you tried to send! 6:50 - Gift from John\Jamie Http://www.WildEats.com 8:22 - Ness G will miss Marc & Nicole 8:52 - Practicing dovetails - What are the essential tools? 12:31 - Round, square and wedge shaped hand sanders - What are the differences? 13:50 - What is the meditation App you use? https://www.simplehabit.com/ 14:20 - Do you have any experience with an M-Power router guide? 14:58 - Used jointer, wood gets stuck when making a pass - Any thoughts? 17:26 - Nicole's about to be an Aunt (again!) 18:01 - How important is a totally flat plane sole? 19:25 - Building panel doors, where\how do you glue\space your panels? 20:39 - How can we donate to WoodWorkers Fighting Cancer at this time? https://www.thewoodwhisperer.com/wfc/ 22:50 - What effect does epoxy have on blade sharpness? 24:47 - How to heat a shop? https://www.thewoodwhisperer.com/videos/shop-heating-options/ 25:56 - What is the jack of all trades bandsaw width\TPI? 27:09 - How do you prevent rust and corrosion? https://www.thewoodwhisperer.com/articles/looks-like-im-rusty/ 30:22 - How many lag bolts from trestle table base to top? 32:17 - What is a project you look forward to finishing with your son? 36:17 - What was Marc's draw to Blue Spruce chisels? 39:28 - When do you use a cabinet vs. a card scraper? https://www.thewoodwhisperer.com/videos/refinishing-part-1/ 42:10 - Is the cabinet scraper the same as a spokeshave? 43:50 - Guild project winner(s)! 44:20 - Eyemuffs winners 44:35 - Patreon support\thanks! https://www.patreon.com/woodwhisperer 45:25 - Current giveaways https://www.thewoodwhisperer.com/giveaway/ 45:39 - Ruobo Workbench & Wall Hanging Cabinet https://thewoodwhispererguild.com/product/split-top-roubo-workbench/ https://thewoodwhispererguild.com/product/wall-hanging-cabinet/ Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Join the Wood Whisperer Guild: https://thewoodwhispererguild.com/ Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 11665 Wood Whisperer Offcuts
Friday Live! - American Green Lights LEDs, WFC Results, & Outdoor Finish Comparison
 
39:22
Recorded LIVE 12/9/16 1:20 - Patreon Announcement: http://patreon.com/woodwhisperer 3:10 - Offcuts channel Youtube update 4:50 - Woodworkers Fighting Cancer Results 7:35 - Garage Shop Update 7:55 - Lighting - American Green Lights http://www.americangreenlights.com/ 10:35 - Heating 13:00 - Handmade Holiday Gift Ideas - http://www.thewoodwhisperer.com/handmade-holiday-gift-ideas/ 14:22 - Do you apply finish before you install hinges? 15:38 - Have you considered building a Thien baffle? http://www.jpthien.com/cy.htm 17:22 - What are some dos and don't about getting your name out there as a new business? 21:01 - Which finish on your Adirondack chairs held up the best? Sikkens Cetol: http://amzn.to/2hRY1Lx Watch Teak Oil: http://amzn.to/2hRUz3l 26:54 - What kind of child safe paint would you spray for a finish? 27:45 - Would you recommend classes at a community college for someone starting out in woodworking? 29:32 - Will you ever do another cooking class together? 30:04 - Is there anything wrong using hard maple for Greene and Greene screw plugs? 30:53 - Do you know anyone who owns a public woodworking shop? 32:07 - What's a good blade to use on my table saw? 32:48 - Do you miss Wawa coffee? 33:15 - What's your favorite species to work with? 34:43 - Marc Tap-dances 34:54 - Will you make some carts for your new shop? 36:45 - Patreon Thank You
Views: 17667 Wood Whisperer Offcuts
Festool Cyclone First Impressions - Friday Live!
 
52:53
1:25 - Welcome to Friday Live! 2:02 - Marc was sent some Ipe offcuts 3:57 - Marc bought the Festool Cyclone and has some initial impressions 11:55 - Marc\Nicole were sent challenge coins! 12:19 - Marc was sent a Fastcap Oscar Square https://www.fastcap.com/product/oscar-square 14:10 - Sale announcement Guild Project Sale! 16:14 - Holiday Party is back! 17:32 - A pizza peel developed a crack after a few days, what happened? https://www.thewoodwhisperer.com/videos/the-pizza-peel-tomato-pie-recipe/ 18:45 - Do you have any issues with fine dust getting into your house? 20:12 - Can the Barrister Bookcase side panels be made with glass instead of Maple\Wood? https://thewoodwhispererguild.com/product/barristers-bookcase/ 20:57 - Do you ever use woodworking joinery in general construction? 21:38 - What's your ideas for the upcoming bunkbed project? 23:42 - Would you make the bunk removable to be used as a standalone bed? 24:43 - Why does Marc own three different block planes? 26:24 - When making wide picture frames, what's a good way to reinforce the corner without a spline? 28:49 - What is one good and one bad surprise about moving to Denver? 31:00 - What is a Superchat? 32:29 - Why would you need a foot brake on a band saw? 34:36 - Is the finish the most important part of a project? How many coats of ARS would you normally apply before rubbing to a gloss? 38:10 - How can you stop cast iron from rusting in storage? 41:50 - With a blanket rack, do I need to worry about wood movement in the legs? 43:08 - Thanks to our new Patreon supporters! https://www.patreon.com/woodwhisperer 43:48 - Do you plan on adding more techniques to the guild in the future? https://thewoodwhispererguild.com/ 45:52 - How long would you make the Ruobo workbench? https://thewoodwhispererguild.com/product/split-top-roubo-workbench/ 47:40 - You should be listening to Woodtalk. http://www.woodtalkshow.com/ 47:57 - Lazy susan is cupping a few days after finishing, why? 49:41 - Any thoughts on getting carving projects in the guild? 51:21 - Sale ends Sunday night for the Shaker table!https://thewoodwhispererguild.com/product/shaker-table/ Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer
Views: 11237 Wood Whisperer Offcuts
Friday Live! - Sloping Floors & Floor Pads
 
40:05
Recorded LIVE 1-6-17 Support the show on Patreon: https://www.patreon.com/woodwhisperer Today we're talking about sloped shop floors and floor pads, as well as a bunch of other Q&A topics. Here's the rundown! 0:38 – Intro to bad high fives 2:12 – Patreon Supporters/Rewards Updates 3:26 – Denver Meetup Information https://www.facebook.com/events/1216213571781644/ 4:00 – Kansas City Woodworking Show Information 5:28 – Have you found the sloping floor in your shop to be an issue? 9:55 – Deeper look at floor mats http://www.thewoodwhisperer.com/articles/shop-flooring-choices/ http://www.thewoodwhisperer.com/articles/rubber-tiles-for-shop-flooring/ 13:58 – Why are you moving more to the offcuts channel? 17:40 – How much longer do you see yourself woodworking? 20:40 – Should I buy Craftsman tools if Sears goes bankrupt? 23:20 – Do you have any experience with Wood River planes and how do they compare to Stanley? 24:00 – Can I build the Split Top Roubo in phases? 24:57 – What’s the best way to remove rust and protect a table saw top? http://www.thewoodwhisperer.com/videos/bandsaw-setup-tuneup/ http://www.thewoodwhisperer.com/articles/looks-like-im-rusty/ 28:00 – Do you like April Wilkerson? 29:06 – What did you spray on your forstner bit in the poker chip tray build? 29:50 – How do I join the Guild? http://thewoodwhispererguild.com 30:50 – Would you ever upgrade to a 12” jointer? 33:00 – What is a good finish to keep walnut dark long term? 34:17 – Any advice on fixing a loose Mortise and Tenon? 36:20 – Is there a time where you had a breakthrough that made you the woodworker you are today? 37:56 – What was your latest “Ah-HA!” moment?
Views: 26991 Wood Whisperer Offcuts
Hand Planes for the Beginner - Friday Live!
 
40:37
0:28 - Friday Live is a PM show next week! 0:54 - Gift from Ness G in Australia 2:24 - Questions about sharpening - Marc is updating an older video on Sharpening. 2:49 - Marc has a new book he is working on about joinery. 4:12 - Follow Marc on Instagram https://www.instagram.com/woodwhisperer/ 4:52 - Woodtone enhancer - Is it just wood toner? 6:45 - What is the skinny on rubbing in a coat of oil and then spraying lacquer on top? 7:37 - WW Thread Taps are owned by Eagle America - http://www.eagleamerica.com/product/v400-3700/new_products 8:21 - How do you carry your plans from the computer to the shop? 10:06 - Is Marc still using Rocketbook notebook? - https://www.amazon.com/dp/B071Y3MSRK/_encoding=UTF8?ref=exp_inf_pl_thewoodwhisperer #Affiliate 11:44 Would Marc do anything different or make any changes with\to the Ruobo after 5 years? https://www.thewoodwhisperer.com/videos/benchcrafted-split-top-roubo/ 13:02 - Marc is NOT on the market, he is still married 13:37 - Do you have to do anything special to use West Systems Epoxy as a topcoat - http://amzn.to/2GJgJCk 15:08 - Who won the Oneida giveaway? - https://www.thewoodwhisperer.com/past-winners/ 16:13 - What is this months giveaway? - https://www.thewoodwhisperer.com/giveaway/ 16:55 - Are people who want real wood furniture a niche market? 19:49 - Did Nicole ever remount and return the bowl Marc fixed for her? 20:33 A review on different basic planes and what you would use them for. Shannon's Video: http://www.renaissancewoodworker.com/beginners-hand-tool-kit/ 27:31 - Marc is going to Seattle to play with farm animals owned by Anne of All Trades. http://www.anneofalltrades.com/ 29:13 - LN & Veritas are both awesome planes. Guild members do get a discount at LN. https://thewoodwhispererguild.com/discounts/ 30:39 What is the difference between quartersawn and flatsawn lumber? - https://www.thewoodwhisperer.com/tww-rewind-a-lumbering-feeling/ 33:24 - All of The Wood Whisperer videos are on Amazon! https://www.amazon.com/The-Wood-Whisperer/dp/B074VFLJ56 33:56 - Does Marc have plans or a video for making a router table? 34:34 - Looking at spraying systems, how are airless sprayers? 35:34 - Do you eventually grind into the hollow on the back of a japanese chisel? 36:47- Is the suction with a large cyclone too powerful for a plastic bin\hopper under the cyclone? 38:45 - Watch Marc on Instagram! https://www.instagram.com/woodwhisperer/ 39:14 - Thanks Patrons, we couldn't do it without your support! https://www.patreon.com/woodwhisperer/ 39:55 - Free project winner 40:12 - PM Show next week! Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer
Views: 23072 Wood Whisperer Offcuts
Tool Hangers & Guild Free Tier - Friday Live!
 
46:12
Today we're discussing my custom tool hangers on my tool wall as well as the upcoming Guile FREE tier. Of course we have plenty of other topics in the Q&A. Here's the rundown: I mentioned new RSS feeds for our live shows. Plug these into your favorite podcast software: 00:05 - Mateo is off to Kindergarten and Nicole needs to swap her chair 00:25 - Nicole does not handle cleaning up dog puke well - Rug Dr. is amazing! 1:20 - Marc needs to be able to "Jersey Talk" 2:20 - Ways to support and where to check out the chat\live show 2:50 - RSS feed for Offcuts Vs. Main TWW 3:38 - Various RSS feeds: Video - http://www.thewoodwhisperer.com/tww_live/feed/video Audio - http://www.thewoodwhisperer.com/tww_live/feed/audio 4:00 - Nicole is working on uploading all the TWW seasons to Amazon Video (Season 11 is currently up) 5:15 - Marc is basically Peppa Pig 5:30 - Would you do anything differently on the Kid's Kitchen Step Stool? 6:51 - Question on Bandsaw setup video for blades close to max blade width capacity 8:01 - Trouble with mortise hinge on boxed lids - How to prevent skew 8:23 - Friday PM is likely 2nd week of Sept. Jay Bates is in the chat 8:47 - Back to the hinge question - Use the barrel as the guide 10:49 - Did you learn anything from Cremona when he was in the shop? Did you learn anything from each other? - Matt learned power-carving 12:06 - Marc enjoyed having another person to bounce ideas off of  13:48 - Nicole won the pancake game with her crunchy French toast 15:18 - Crunchy French Toast Recipe http://www.thewoodwhisperer.com/videos/everyday-how-to-the-podcast-that-never-was/ 16:00 - Information on new free tier for Wood Whisperer Guild 19:50 - John Funk is the "behind the scenes guy" - Kudos to him! 20:15 - Have you sprayed melamine with water based poly?  21:37 - Marc bought some JB Weld (it reminds him of his Grandfather) & what smells remind you of other things? 23:17 - Can you start the Ruobo before owning the hardware? Do you need the attached stool? 24:33 - Scott Griffith - Thanks for the Superchat - Does Flamed Birch have natural waxes that prevent normal finishing 26:50 - Ness G - Thanks for the Superchat - It's past midnight in AUS - Marc loves your avatar! 27:20 - Can Marc gives some better information on the way he has his tools hung on his wall. 30:13 - How big do you want the guild to be? Would you do in person classes?  32:35 - If you have a thicknesser\planer but no table saw, how would you joint the final edge of the board?         33:35 - Marc will be teaching a class in 2018 at the Marc Adams School!  More info to come in the future. https://www.marcadams.com/ 35:05 - Do you try and avoid combining certain woods? 37:14 - Marc has not added lighting to the Barrister bookcase - A future video will be done to fix one of the doors 38:02 - JB Alexander - Thanks for the Superchat! - What are the differences between hand planing and sanding? 39:35 - What is the Woodworkers Fighting Cancer project this year? Ness - Go to sleep! 42:33 - Patreon - https://www.patreon.com/woodwhisperer - Thanks to new patreons! 42:45 - Mike Coates - Thanks for the Superchat! - How do you deal with bent end grain to make it not look like plywood (Morris Chair)? 44:21 - Alex L. is the free project winner for his question 44:58 - Matt hid all of Marc's pencils 45:05 - What are the pens on Marc's workbench? Pilot Friction Pens for https://getrocketbook.com/ Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 15759 Wood Whisperer Offcuts
Free Sh*t Friday - Friday Live!
 
01:13:19
Today we're showing off some awesome stuff sent to us by our online friends! You guys are awesome. We also decided to return the favor by giving away a free Guild project to everyone who had a question answered live! Here's the rundown: 2:10 - WW Thread tap holder 3:02 - Why are your arms shiny? - http://saniderm.com/ - https://www.youtube.com/user/OhItsTeddy 6:10 - Solution to Nicole's challenge coin problem. 7:18 - Marc and Nicole's goodies 8:36 - Fuji spray conversion gun 10:55 - What was your biggest screw up? 13:50 - Are there any considerations to make for router bit speed? 15:44 - How do I keep my router from falling off at the end of the cut? 17:13 - Why do you sometimes apply glue to one piece and other times apply glue to both? 19:09 - Can you help me decide between a mortiser and a domino? 21:31 - Would there be too many limitations using the Festool MFT system with S4S lumber in a mobile situation? 22:22 - What's so great about the MFT? 23:48 - Why do you now sand to higher grits vs what you used previously? 26:14 - Should I store my lumber in my basement instead of in my carport where I normally work? 28:55 - If you could only have 10 tools what would they be? 30:36 - Do you ever use screws in your joinery? 32:10 - How would you convince a beginner to stop buying wood from a big box store? 33:00 - What blade would you recommend instead of a stock table saw blade? 34:22 - What is the best method to repair a 45 miter joint that is separating after the finish is applied? 35:47 - Do you like tacos? 36:50 - Do you know the difference between the difference of the blades available for LV planes? - http://pmv11.com/Story.aspx - http://www.thewoodwhisperer.com/articles/a2-vs-o1-tool-steel/ 38:30 - Dust mask recommendations for kids? 40:14 - I'm building a table for family and they want something dark, what wood should I use if I can't afford walnut? 42:02 - When choosing a glue is it important to factor in the species of wood? 44:35 - If you didn't have your Leigh dovetail jig, would you hand cut your dovetails? 47:15 - What tools or techniques can increase my shop efficiency. 50:53 - Have you guys made a kids workbench? 51:55 - Do you use Bloxygen on glue? 52:36 - Are all your tattoos black and white and do you have a favorite style? 53:45 - Do you have a favorite bandsaw blade for hardwoods? 54:58 - What angle do you sharpen your bench chisels to? 56:10 - What's your opinion on radial arm vs chop saw? 57:10 - Is there a market for home made tools? 58:32 - Are guild projects worth the money? 1:00:01 - I'm having trouble finding good used power tools, do you have any tips? 1:01:10 - What's a good tooth count for a 12" miter saw blade? 1:03:30 - What bits are a must have for your first router? 1:06:46 - Do you have any experience with cut quality on different types of cutterheads? 1:08:00 - Can I join the guild outside the US? 1:08:33 - Information on Matt's visit 1:10:11 - New Patreon supporters 1:12:45 - The local fat doberman Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 15647 Wood Whisperer Offcuts
The Epoxy Fad - Friday Live!
 
47:01
0:06 - Marc wants a higher quality stream 0:45 Marc wants to know if Epoxy River Tables are the mullets of the woodworking world? https://thewoodwhispererguild.com/product/waterfall-river-table/ 3:05 WELCOME TO Friday Live! - Marc was at FWW Live http://www.finewoodworkinglive.com/ 3:22 Nicole's Morning Podcast team met up in Vegas and threw axes The Morning Stream http://frogpants.com/tms 5:10 - Gift from Ness 6:20 Microjig sent Marc a very nice gift featuring Match Fit clamps. https://amzn.to/2JSw0kU 8:33 Someone heard about Marc on Nicole's Podcast years ago 8:50 - Patreon! Support the Show! https://www.patreon.com/woodwhisperer 9:45 - Bathroom vanity - What is the most efficient way to make the frame and panels? 11:37 - Do you ever worry about PPE for your pets? 14:30 - What's the project that you really want to tackle but you find intimidating (white whale project)? 16:59 - What two pairing chisels would you buy if you could only buy two? 18:34 - If you were only buying a single dovetail chisel, what would you buy? 20:38 - What is the one project you have done that gave you the most gratification? https://thewoodwhispererguild.com/product/sculpted-rocker/ https://www.thewoodwhisperer.com/videos/memorial-box/ 22:45 - Marc writes out the steps to a project to keep organized 23:45 - Marc has started the "Executive Desk" guild build. https://thewoodwhispererguild.com/product/executive-desk/ 25:20 - Do you even stain Walnut to keep the dark color (for items in the sun)? 27:55 - With no money limitation, what is one wood that you would use that intimidates you? 30:04 - Why is Ebony considered to be so "precious"? 31:20 - What's the deal with compression bits? 33:26 - What width of blade would Marc recommend for a utilitarian blade? 35:33 - What is your take on square drill bits(Likely a hollow chisel mortising bit)? 36:56 - Infinity Mega Flush Trim Bit https://www.amazon.com/dp/B07B41NQL5/?ref=exp_inf_pl_thewoodwhisperer https://www.amazon.com/dp/B07B3ZPGCD/?ref=exp_inf_pl_thewoodwhisperer 38:35 - More discussion about Hollow Chisel Mortising Bit 39:44 - What is your suggestion for a kids project? https://www.thewoodwhisperer.com/videos/grasshopper-pull-toy/ 40:50 - Would you recommend using your assembly table as an outfeed table? 43:50 - What grits of sandpaper do you keep the most? 44:55 - Thank You to our Patreon supporters! 45:36 - Free Guild Project! Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer
Views: 16914 Wood Whisperer Offcuts
SawStop Breeds Complacency? - Friday Live!
 
47:31
Support the show on Patreon! http://patreon.com/woodwhisperer 0:17 - Welcvome back to Friday Live! 0:53 - Marc's trip to Seattle (Darrell Peart & Anne of All Trades) 0:53 - Darrell's Freemont Nightstand - Preorder now for the discount! - https://thewoodwhispererguild.com/product/fremont-nightstand/ 0:53 - Anne's Writing Desk - Preorder now for the discount! - https://thewoodwhispererguild.com/product/writing-desk/ 3:15 - Freemont Nightstand preview 5:53 - Anne of All Trades is renaming her Llama "Cremona" 7:14 - Seattle Meetup recap 9:06 - Gifts Marc received 10:25 - Pine is Fine T-Shirt! - https://teespring.com/pine-is-fine 11:04 - Nicole's new favorite challenge coin 11:21 - DFM Toolworks card scrapers - https://dfmtoolworks.com/ 12:13 - Marc met Bill from Punished Props - http://punishedprops.com/ 13:00 - Scott Hampshire has made a BAN HAMMER! - https://www.instagram.com/hampshirewoodworks/ 14:36 - Wood.Work.Life\Diresta interview W\ Marc Cameo - https://www.youtube.com/watch?v=1mKNBdI2GJQ 15:12 - Did you learn anything working with Anne And\Or Darrell? 18:02 - Have you ever had issues with glue curing in a vacuum press? 19:00 - Making a door with dissimilar woods (Any issues?) 21:26 - Perforated bags for a veneer press? 22:26 - Is it too early for presale info on Marc's new book? 23:16 - Does Marc have any changed thoughts on Sawstop and Complacency? 28:05 - Pine or Cedar for an outdoor sign? 29:15 - Have you ever used a router to round over box joints\Avoiding tearout? 29:51 - When working with dark woods, what glue would you use? 30:58 - Any advice on exploring an interest in woodworking? 33:22 - What is your (broad) process for thinking about a new project? 34:11 - Have you tried any of the Shark Pull saws? https://www.sharkcorp.com/ 34:48 - Do you have any recommendations to being motivated to go into the shop? 36:37 - Do you lose sleep during a project due to thinking about the project? 38:51 - Is a hot dog a sandwich? 39:29 - What do you recommend for someone who has trouble visualizing a drawing for preparing a project? 42:29 - What do you think about the thickness of Titebond 3? 43:34 - Where should the splitter be positioned Vs. the blade on a tablesaw? 45:25 - Guild project winner! Darrell Peart - http://furnituremaker.com/ Anne Briggs - http://www.anneofalltrades.com/ Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Join the Wood Whisperer Guild: https://thewoodwhispererguild.com/ Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 19566 Wood Whisperer Offcuts
36" vs 50” Tablesaws & Why People Give Us Money - Friday Live!
 
39:19
0:55 - Patreon Discord 1:16 - PM edition tonight! 2:18 - Marc's swag & thanks 3:01 - Marc's T shirt size is Large 5:07 - Scandinavia tool source update 5:40 - Do you see an advantage in using decimal instead of fraction in metric or imperial? 6:50 - Where will TWW be in 5 years? Do you set woodworking goals for yourself? 9:12 - Any suggestions on where I can learn to get my advertising and business presence known? - nicolespag.com/resources 12:07 - What do you do when you've invested a lot of time in a project but realize it's just not working out? 13:20 - Any recommendations for a plunge router? 15:10 - When is Marc going to do a challenge coin display case? 15:35 - What vises should I design into my bench? 17:39 - Do I need to pre raise the grain on all wood before finishing? 18:54 - Are there any disadvantages to skip planing then jointing? 20:28 - Am I crazy to use plywood in an outdoor project? 21:38 - Do you have an opinion on the Shaper Origin handheld CNC? 22:24 - Should I get a 36 or 52" table on my Sawstop? 24:27 - Why are people paying you? 26:55 - Do you have any 360 video of the shop? 27:45 - Should I run a dehumidifier in my shop prior to finishing? 30:33 - Any handtools I could pick up in the UK? 32:15 - What was your most challenging project and would you do it again? 34:15 - How do you choose an edge profile for your projects? 35:30 - Guild project winner 35:55 - New Patreon supporters Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 45855 Wood Whisperer Offcuts
Blotchy Cherry & Business Talk - Friday Live
 
39:47
Today we discussed cherry and its tendency to blotch as well as the various aspects of running a woodworking business. Of course, we also had a bunch of other topics and questions. Here's the rundown: 0:49 - Good morning Littleton 1:19 - We were at Nerdtacular last week 3:01 - Patreon is where you can support the show 3:09 - New bandsaw video with Alex Snodgrass 3:35 - Wood Whisperer Taps announcement 4:29 - New giveaway this month 8:46 - What are the planes I should acquire if I'm trying the hybrid method of woodworking? 10:47 - Are there any gotcha's when finishing cherry (eg blotching, etc)? 15:33 - What next project will build on the skills I learned from the morris chair build? 16:41 - What's the deal with lock miter joints? 17:40 - How can I make a desk top more durable? 19:04 - Do you have a favorite joint? 19:50 - Should I also invest in a new dust collector when I buy a new tablesaw? 21:50 - Have you ever thought about using a CNC? 22:28 - Who are some good online lumber suppliers? 25:05 - Have you tried Fusion 360? 25:11 - If you lost all of your tools, what would you get first to replace them? 26:42 - What types of replacement blades do you use for your knew concepts saw? 27:42 - Have you ever tried Gorilla Glue for a finish? 29:08 - When is the next PM show? 30:18 - What size of bandsaw blade is needed to make a bandsaw box? 31:18 - Do you have any tips to making money on my woodworking? 36:10 - Guild project winner 36:25 - New Patreon supporters 37:45 - Why we need to ban Carl Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 15038 Wood Whisperer Offcuts
Sizing Joinery - Friday Live!
 
44:06
1:11 - Welcome to Friday Live! 1:38 - Support the show at Patreon! http://patreon.com/woodwhisperer 1:42 - New question answering format 3:09 - Gifts from Australia 3:18 - Eyemuffs https://www.eyemuffs.com/ 6:03 - Tgae Frid teaches woodworking https://www.amazon.com/dp/1561588261/?ref=exp_inf_pl_thewoodwhisperer 7:25 - IsoTunes Pro giveaway part two! https://www.amazon.com/dp/B075MHXQFV/?ref=exp_inf_pl_thewoodwhisperer 7:51 - Lie Nielsen chisel set giveaway for the guild! https://www.lie-nielsen.com/nodes/4080/chisels 9:03 - Sofa Table - Will be on free site! 11:26 - Are you still shipping TWW Mugs? http://www.twwstore.com/product/tww-coffee-mugs 12:20 - TWW Leather aprons are back in stock! http://www.twwstore.com/product/guild-apron 12:39 - Significant binding when sawing 8/4, what's going on? 15:10 - Paint sprayer to decrease finishing time? Fuji HVLP - https://amzn.to/2IORoaZ 16:08 - Sizing tenons properly - Chris Schwarz article - https://www.popularwoodworking.com/techniques/joinery/tenons-rule-so-here-are-the-rules-on-tenons 20:13 - Any recommnedations for a small compressor? California Air Tools - https://amzn.to/2IOiUFH 21:46 - How do you feed a kids natural passion for woodworking? https://imadeitworkshops.com/ 25:58 - Are the TWW WoodTaps coming back? http://www.eagleamerica.com/product/v400-3700 26:28 - What's the strength difference between the domino and a beadlock tenon? 29:08 - How many challenge coins does Nicole have? Will Marc ever build her a display rack? 30:10 - Do you design with kids in mind? Do your kids ever run into your freshly completed project? 32:53 - What hand plane should I get to start? https://www.thewoodwhisperer.com/tww_live/hand-planes-beginner-friday-live/ 36:14 - How do you feel about resin in wood over time? 37:27 - Is there anything you would do differently with the Barrister bookcase? https://thewoodwhispererguild.com/product/barristers-bookcase/ 39:01 - Why doesn't Marc upload as much to his YouTube channel? https://www.youtube.com/channel/UCKp44bWWZIiOPShPN_ytShw Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Join the Wood Whisperer Guild: https://thewoodwhispererguild.com/ Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 11651 Wood Whisperer Offcuts
Walnut & Routing Direction - Friday Live!
 
40:38
Today we're talking about walnut properties, routing direction, and many other topics from your questions. Here's the rundown: 2:54 - Is there anything I should look out for when working with walnut? 8:00 - What bluetooth hearing protection are you using these days? http://amzn.to/2nogn9A 9:30 - How do uphill and downhill cuts work on a router? 13:12 - Can you explain grain direction when jointing a board? 15:32 - Are you going to WIA this year? 16:10 - Can I get by without a jointer in my shop? 18:50 - Have you picked up the new Zelda? 19:44 - Should I get the Supermax 19-38 or Jet 16-32 drum sander? 21:15 - Any updates on the taps? http://wwthreadtaps.com 23:14 - How can I sand a chamfer without rounding the edges? 26:46 - What's the acceptable amount of the shank to be extended above the collet on a router bit? 30:13 - Where are you getting your wood in Denver? 31:46 - What's the best way to avoid planer snipe? 33:45 - Can the metric taps only be bought in a set? 34:15 - When can we expect the dining room chair in the guild? 35:40 - Could you recommend paints for baby toys? 37:20 - Patreon Thanks 39:34 - NoMona/Silence the Whisperer Campaign Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 19963 Wood Whisperer Offcuts
Leveling Chair Legs - Friday Live!
 
42:27
Here's the rundown! Support us on Patreon! http://patreon.com/woodwhisperer 0:40 - Giveaway winners 1:30 - Guild member discount at Oneida http://woodwhispererguild.com/discounts 3:06 - Reddit contest giveaway - https://www.reddit.com/r/woodworking/comments/5uowjb/the_fine_woodworking_52_boxes_in_52_weeks_build/ 4:39 - Woodworkers Fighting Cancer update - http://www.thewoodwhisperer.com/2016woodworkers-fighting-cancer-results/ 6:30 - Patreon reward coins came in this week. 7:08 - How do I level a project with 4 legs? 12:40 - How are the Jet 18-36 drum sanders in regards quality? 14:14 / 19:02 - How do I deal with arguing quality vs cost with my spouse? 15:30 - Nicole tells Marc her deep dark secret. 16:22 - Any advice for someone getting started and tackling their first major project? 20:55 - Does birch go well with maple? 22:25 - After using a tung oil blend on wenge I have to wipe excess oil off for several hours, is this normal? 24:00 - Have you ever used router bits in a shaper? 26:58 - What brand of CA glue do you use? 27:37 - Have you used the beard friendly dust mask yet? 30:22 - Any advice adding an extension fence to a miter saw? 33:17 - How do I deal with family members who expect full access to my shop? 36:01 - What are your thoughts on a combo jointer/planer as a save spacer in a small shop? 37:09 - What should I get after the table saw? Drill or Band saw? 40:21 - Patreon thanks. 41:02 - Trestle table video part 1 update. Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer
Views: 15250 Wood Whisperer Offcuts
Friday Live! Chisel Giveaway today!
 
51:04
0:00 Welcome to Friday Live! 1:17 -There's a sale in The Wood Whisperer Guild! http://thewoodwhispererguild.com 3:52 - Thanks to our new Patron supporters! https://www.patreon.com/woodwhisperer 4:32 - Would Marc go to Salt Lake to do a class? 5:08 - Don't put your cofee and Titebond next to each other... 6:13 - What are the chisels being given away today? 7:59 - What's Marc's end goal for the guild? 10:28 - What humidifier does Marc and Nicole use? 11:55 - Is there a risk in making things look too easy? 14:14 - How\When did you make the transition to using finer\more expensive woods (versus home stores)? 17:16 - Marc gets beginners started as well as people who have some experience. 18:38 - Why are floating tenons called floating tenons? Why do you use them (compared to dowels)? 21:17 - How do you prevent kids from interrupting you in the shop? 23:24 - Can Canadians participate in your prize giveaways? 24:28 - When did Marc start calling himself a woodworker? 25:10 - Is Walrus Oil better than Tried & True? 27:01 - Samsung Smartthings door sensors can help knowing if someone enters the shop 27:51 - Do you have any information on hot melt glue? 29:39 - How do you get a smooth finish with Zebra wood (using hand tools)? 31:25 - What are your thoughts on having an impact driver and a drill? 32:32 - What is your favorite go-to quick gift project? 36:18 - How do you not make pieces look bulky with only a table saw and miter saw? 38:16 - What woodworking places in Denver does Marc\Nicole recommend? 39:27 - Have you tried to use varnish blends (like Tried & True varnish blends) on cutting boards? 41:14 - Can you do one time donations? http://thewoodwhisperer.com/support 42:02 - Do you have tips with gaining confidence with a method\technique you aren't comfortable with yet? 44:46 - Will Tried & True require lots of work to keep up on a dining room table? 45:38 - Do you prefer scraping with a cabinet scraper or card scraper? 46:37 - What's your favorite tool? 57:14 - Friday Live chisel giveaway! 48:28 - Do you have any recommendations on a coping saw blade? 49:50 - Free guild project winner! 50:00 - Chisel giveaway winner! Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer Check out our website: http://thewoodwhisperer.com Support us on Patreon: https://www.patreon.com/woodwhisperer Products recommended by Marc https://www.amazon.com/shop/thewoodwhisperer

bf still on dating site
dating aries woman
tempat dating best di johor bahru
i'm 27 dating a 21 year old
essex dating website